Is Roku Faster With Ethernet? Roku is among the market’s best players that stream over a stable internet connection.
But then again, Roku devices such as the TV and the Ultra series can connect via Ethernet or WiFi.
As a rule of thumb, if a wireless connection becomes sluggish, you should opt for an Ethernet cable to get more reliable internet speeds.
But most users wonder, is Roku faster with Ethernet?
In this article, we’ll show you whether Ethernet provides faster speeds than WiFi connection on Roku.
Table of Contents
- About Roku’s Wired Connection
- How to Set up Ethernet on Roku?
- Is Roku Faster Using Ethernet?
About Roku’s Wired Connection
The wired or Ethernet connection came as an afterthought during Roku manufacturing.
It is why many of the Roku devices and gadgets currently lack an Ethernet port.
The only Roku devices with an Ethernet port are Roku TVs (TCL, Hisense, etc.), Roku ULTRA LT, and Roku ULTRA (4800).
Before highlighting the speeds you get on Roku via a wired connection, you should know this.
The speed requirements for streaming on Roku via the Ethernet port vary with the quality of the content you view. Here are the requirements:
|Standard Definition (SD – below 720p)
|1.5 – 3 Mbps
|High Definition (HD – 720p)
|Full HD (1080p)
|10 –15 Mbps
|Over 20 Mbps
Some Roku devices do not have a dedicated port but still support the Ethernet connection feature.
They include the Roku Express (base and UK), Roku Smart Streambar, and Roku Streaming Stick 4K+.
But these devices can host Ethernet connections through USB to Ethernet dongles.
How to Set up Ethernet on Roku?
Plugged Ethernet cables
Once you connect the Ethernet cable to the Ethernet port of your Roku device and the other end to the router/modem, the hard part is probably over.
After the connection, follow these steps to set up the Ethernets connection on your Roku:
- Open Settings from the Home screen
- Scroll and find the Network tab
- Click on “Wired Connection”
- Your Roku will start scanning for an Ethernets connection
Once Roku detects the connection, it will set up your Ethernets automatically.
If you want to confirm your Ethernet connection transfer speed on the device, go to the Network tab and open the “Check Connection” tile.
The device will run a speed test and show you the signal strength, transfer speed, and other information about the connection.
Is Roku Faster Using Ethernet?
A WiFi router and an Ethernet cable
If you are wondering which one is faster, a WiFi or an Ethernet connection, the Ethernet connection is faster.
But with a Rokus device, Ethernet is considerably slower when compared to Roku WiFi speed.
All you can get from the wired alternative is a maximum of 100 Mbps.
Meanwhile, Roku devices have AC 2×2 WiFi cards capable of hosting 2.4GHz and 5 GHz network bands.
These network bands offer better transfer speeds of about 150+ Mbps, significantly better than a wired connection.
The WiFi connection speed may be impressive, but it is susceptible to high latency, signal drop, complete dead zones, interferences, traffic overload, and proximity-induced issues.
Ethernet cable does not experience environmental interferences, dead zones, or proximal issues.
However, it would be best if you placed the Roku close to the router to connect to it.
Whether you use Ethernet or WiFi on your Roku device depends on a few factors, including network conditions and how you plan to use it.
While Roku WiFi offers faster speeds, it may be more prone to high latency, signal drops, interferences, dead zones, and other network-related problems.
On the contrary, opting for a Roku Ethernets connection provides a consistently stable connection that surpasses the potential limitations of a wireless connection.
Hope you find the method of connecting to the network that works best for you.