About Starlink Dish Case, The current most impressive upgrade by the Starlink company is allowing roamers to access Starlink services while on the road. Do you imagine the number of possibilities that would open?
Therefore, getting a quality Starlink Dish Case should be on your bucket list as a constant road user.
Several people often place the router and dish in a simple cardboard box. While this is easy and inexpensive, we would recommend it.
For one, the box has no good padding and is not water-resistance. It is bound to give out over time, posing a risk to your equipment.
Instead, we are recommending cases suitable for transporting and storing Starlink.
The kind that is waterproof, compatible with the dish, has padded compartments, etc., even though you’d have to get into your pockets.
Table of Contents
- Is A Case Necessary?
- Choosing an Aftermarket Case or an Official Travel Case for Starlink?
- Best Starlink Dish Case
Is A Case Necessary?
It depends. If you’re always indoors and never take your Starlink with you on the road, a case isn’t necessary.
However, if you are on the move and require a Starlink kit in the process, a case will come in handy.
Starlink’s hardware is costly (at $599 during its purchase) and fragile. Therefore, finding ways to protect your kit equipment is essential.
You might break the bank by buying a sturdy and long-lasting case, but they guarantee safety and full-time protection.
Overlanders, van dwellers, and RV’ers who use Starlink dish for communication and internet while traveling might hugely benefit from the cases.
Choosing an Aftermarket Case or an Official Travel Case for Starlink?
The table below shows some differences between official travel cases and aftermarket cases.
|Characteristics||Aftermarket Case||Starlink Travel Case|
|Compatibility||Compatible with Rectangular and Round dishes.||Only compatible with rectangular dishes.|
|Compartments||Customizable. It further has an option of directly mounting your dish on the case.||It has a padded internal part with zip-lined compartments.|
From the table. You can see that aftermarket cases have more advantages compared to an official Starlink travel case.
Either way, you can opt for the DIY route when on a tight budget but still needing a case.
Just purchase an affordable case from the store, then customize it to match your needs.
It’ll work similarly to the official travel case one. Alternatively, you can check for expensive Starlink cases in the market.
But before the two options above, consider thoroughly checking the aftermarket options and ascertain if they’re good for you.
Best Starlink Dish Case
Our six top Starlink dish case picks are as follows:
Pelican 1610 Case that has foam
- First, it is the best, most heavy-duty case on the market.
- Then, it has a purge valve and air-tight seal, making it wholly waterproof.
- It also has steel-reinforced padlock holes.
- You can easily customize the pluck and pull foam.
- It has a thick, rugged exterior that guarantees durability.
- A bit expensive
- It can be heavy and bulky in certain scenarios.
HDX 17 Gal. Storage Tote
- It has a thicker and stronger plastic compared to other cases like the Ezy tote.
- With the HDL tote case, you can stack many other totes on each other’s lids.
- Moreover, it padlocks holes and a lid that snaps nicely.
- It doesn’t have excessive wiggle room since it perfectly fits the router and Starlink dish.
- It is also affordable and has a nice design.
- It has no complete seal against moisture, dust, and water.
- You can fit cables or any extra equipment in it.
Ezy Storage Waterproof Plastic Storage Tote
- It is transparent, making it easy to see the contents.
- It provides a watertight and an IP67 air-tight seal.
- Furthermore, it offers six sturdy latches creating a robust seal between the tote and lid.
- Most cost-effective than a Pelican case.
- Its material is durable, heavy-duty plastic.
- Unfortunately, you cannot stack totes on each other’s lids.
- Also, it might not be ‘bombproof’ compared to a Pelican case.
- Then, being it allows space, you may need bubble wrap or padding for a better fit.
Zarges USA Shuttle Case
- It has lockable latches to secure storage.
- In addition, the carrying handles make it easy to carry around.
- It can accommodate Starlink cables, base, router, and antenna.
- It also has a foam storage system.
- It suits the most demanding surroundings, such as deployment situations.
- It is very expensive.
Nanuk 945 Waterproof Hard Case
- The case has several handles for grabbing when lifting into an RV, van, or truck.
- Then, it has a cubed foam that leaves room for cutting when creating a spot for the Starlink.
- Besides being waterproof, it also has an impact-resistant shell.
- It is cheap.
- It lacks wheels. Therefore transportation might be a hustle.
Caseman 20911 Rugged Travel Case
- It has extra room for your portable supply. Thus, you won’t have to carry a battery on every road trip.
- It also has a built-in feature that helps you mount a dish.
- Finally, it is watertight and has a good balance for stability.
- It is pricey.
Last, if the above options seem out of reach, how about making your case?
For this process, you’ll need cubed foams that are easy to shape and a cheap storage container/tote. Next, cut the foam into a desirable design, then fit it in the tote.
However, this will mean saying goodbye to a waterproof structure with unlockable/not-so-secure features.
Undoubtedly, getting a Starlink dish case is a lifesaver. It’ll not only protect your Starlink kit from elements like water, but it’ll also enable you to travel smoothly.
If spoilt for choice, you can start by checking our top-most pick, the Pelicsn 1610 Case with foam. Despite being expensive, it passes almost all criteria of a quality and reliable case.
For more content on Starlink, kindly check our website.